LMV321LILT
| Parameters | |
|---|---|
| Current - Output / Channel | 70mA |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.06μA |
| Programmable Power | NO |
| Power | NO |
| Max Junction Temperature (Tj) | 150°C |
| Ambient Temperature Range High | 125°C |
| Height | 1.45mm |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Manufacturer Package Identifier | SOT23-5-GAMS1812131437CB |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LMV321 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 130μA |
| Nominal Supply Current | 220μA |
| Output Current | 46mA |
| Slew Rate | 0.7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 72 dB |
| Current - Input Bias | 27nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 43mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 1.3MHz |
| Unity Gain BW-Nom | 1300 kHz |
| Voltage Gain | 90dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
LMV321LILT Overview
The linear amplifier is packaged in a SC-74A, SOT-753 case. There are two types of operational amplifiers in this circuit. A Tape & Reel (TR) case is used for delivering the op amp. The number of terminations is approaching the 5 mark. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 5 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 1mV. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . An 130μA volt supply current is needed for this linear amplifier to operate. Keeping the voltage gain at 90dB is the best course of action. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. According to the specifications of the buffer op amp, the operating supply voltage is rated at 1. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps.
LMV321LILT Features
supply voltage of 5V
90dB voltage gain
Output Type: Rail-to-Rail
LMV321LILT Applications
There are a lot of STMicroelectronics LMV321LILT Instrumentational OP Amps applications.
- Video amplifiers
- Polarized electrodes
- Home audio systems
- High speed sample
- Portable media players
- Large motor controllers
- Fission chambers
- Radiation thermometry transducers
- Medical instruments
- Automation control systems
