LMV321M7/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMV321 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Nominal Supply Current | 130μA |
| Output Current | 60mA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 15nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.7mV |
| Current - Output / Channel | 160mA |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV321M7/NOPB Overview
Op amp is packaged in 5-TSSOP, SC-70-5, SOT-353 case. The instrumentation amplifier in this picture is of the General Purpose-type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 5. Linear amplifier has a total of 5 pins. This linear amplifier should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 5 pins are included on the operational amplifiers. Regarding input offset voltage, op amp rates 7mV. For this electrical component, Surface Mount is the recommended mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . There should be no change in the voltage gain. This op amp contains 1 circuits. The op amp ic has 1 channels on it. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of instrumentation amplifier is rated 5V voltage. As a result of this, the buffer amplifier is packed in TR.
LMV321M7/NOPB Features
5 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
LMV321M7/NOPB Applications
There are a lot of Texas Instruments LMV321M7/NOPB Instrumentational OP Amps applications.
- Television
- Multimedia playback equipment
- Weighing systems
- Computer workstations
- Test and measurement instruments
- Video amplifiers
- Portable docking station
- Micro signal measurement
- Addition operation circuits
- Active probe
