LMV321RILT
| Parameters | |
|---|---|
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LMV321 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 162μA |
| Nominal Supply Current | 230μA |
| Output Current | 46mA |
| Slew Rate | 0.45V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 16nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~6V |
| Output Current per Channel | 48mA |
| Input Offset Voltage (Vos) | 6mV |
| Bandwidth | 1.3MHz |
| Unity Gain BW-Nom | 1300 kHz |
| Voltage Gain | 97dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 100μV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.063μA |
| Programmable Power | NO |
| Power | NO |
| Max Junction Temperature (Tj) | 150°C |
| Ambient Temperature Range High | 125°C |
| Height | 1.45mm |
| Length | 3mm |
| Width | 1.75mm |
LMV321RILT Overview
Op amp is packaged in SC-74A, SOT-753 case. Buffer amps of this type are called General Purpose-types. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 5 terminations. Buffer amplifier has a total of 5 pins on it. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. It has 5 pins that make up the linear amplifier. Op amp rates 6mV as input offset voltage. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . Operational amplifier can operate supply current at 162μA. The voltage gain should stay at 97dB. As far as the device is concerned, buffer amplifier has 1 channels. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted.
LMV321RILT Features
5 Pins
supply voltage of 5V
97dB voltage gain
Output Type: Rail-to-Rail
LMV321RILT Applications
There are a lot of STMicroelectronics LMV321RILT Instrumentational OP Amps applications.
- Non-polarized electrodes
- High speed sample
- Gaming industry
- Radiation thermometry transducers
- Proportional operation circuits
- Television broadcasting equipment
- Band-stop filter
- Polarized electrodes
- Communication
- Differentiator circuits
