LMV324ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LMV324 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5V |
| Number of Channels | 4 |
| Operating Supply Current | 410μA |
| Nominal Supply Current | 170μA |
| Output Current | 160mA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 15nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 160mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 1.7mV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.25μA |
| Programmable Power | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.05μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV324ID Overview
The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the General Purpose-type. The op amp is delivered to you in a Tube case. There have been a total of 14 terminations over the past year. It consists of a total of 14 pins in total. The linear amplifier should be run at 2.7V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 14 pins are included on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 7mV voltage. Surface Mount is the recommended mounting type of operational amplifiers. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . Operational amplifier can operate supply current at 410μA. 100dB should be the voltage gain. Buffer op amp is equipped with 4 channels on the device. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages.
LMV324ID Features
14 Pins
supply voltage of 2.7V
100dB voltage gain
Output Type: Rail-to-Rail
LMV324ID Applications
There are a lot of Texas Instruments LMV324ID Instrumentational OP Amps applications.
- Micro signal measurement
- Tablets
- Hand-held batteries
- Scintillation detectors
- Signal amplification
- Portable docking station
- ECG equipment
- Video conversion and routing
- Band-pass filter
- High/low-pass filter circuit
