LMV324IPT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LMV324 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Power Supplies | 2.7/5V |
| Number of Channels | 4 |
| Operating Supply Current | 162μA |
| Nominal Supply Current | 162μA |
| Output Current | 46mA |
| Slew Rate | 0.45V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 16nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~6V |
| Output Current per Channel | 48mA |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 1MHz |
| Gain Bandwidth Product | 1.3MHz |
| Unity Gain BW-Nom | 1300 kHz |
| Voltage Gain | 97dB |
| Average Bias Current-Max (IIB) | 0.095μA |
| Low-Offset | NO |
| Frequency Compensation | NO |
| Supply Voltage Limit-Max | 7V |
| Low-Bias | NO |
| Micropower | NO |
| Max Frequency | 100kHz |
| Bias Current-Max (IIB) @25C | 0.063μA |
| Programmable Power | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.025μA |
| Max Junction Temperature (Tj) | 150°C |
| Height | 1.2mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV324IPT Overview
In the package, you will find a 14-TSSOP (0.173, 4.40mm Width)-case to contain the op amp ic. General Purpose-type instrumentation amplifiers are used in this application. A Tape & Reel (TR) case is used to deliver the buffer op amp. There is a growing number of terminations approaching the number of 14. There are a total of 14 pins on this op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. It should be noted that this op amp is a type of Operational Amplifier device. The buffer op amp includes 14 pins. With regard to input offset voltage, instrumentation amplifier is rated at 100μV. Surface Mount is the recommended mounting type of operational amplifiers. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. In order for this instrumentation amplifier to operate, the supply current needs to be between 162μA and 10 . Voltage gain should remain at 97dB. There are a total of 4 channels available on the op amps. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. For the packing of the instrumentation amplifier, TR is adopted.
LMV324IPT Features
14 Pins
supply voltage of 5V
97dB voltage gain
Output Type: Rail-to-Rail
LMV324IPT Applications
There are a lot of STMicroelectronics LMV324IPT Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Communication
- pH (acidity)
- High gain DC amplifier
- Weak signal detection
- Radar
- High/low-pass filter circuit
- Fission chambers
- Test equipment
- Medical instruments
