banner_page

LMV324QPW

160mA per Channel 15nA 50 dB Instrumentational OP Amps 0.25μA 2.7V~5.5V ±1.35V~2.75V LMV324 14 Pins 14-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LMV324QPW
  • Package: 14-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 122
  • Description: 160mA per Channel 15nA 50 dB Instrumentational OP Amps 0.25μA 2.7V~5.5V ±1.35V~2.75V LMV324 14 Pins 14-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-TSSOP (0.173, 4.40mm Width)
Number of Pins 14
Operating Temperature -40°C~125°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 2.7V
Base Part Number LMV324
Pin Count 14
Output Type Rail-to-Rail
Number of Elements 4
Power Supplies 3/5V
Operating Supply Current 410μA
Nominal Supply Current 170μA
Output Current 160mA
Max Supply Current 680μA
Slew Rate 1V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 50 dB
Current - Input Bias 15nA
Voltage - Supply, Single/Dual (±) 2.7V~5.5V ±1.35V~2.75V
Output Current per Channel 160mA
Input Offset Voltage (Vos) 7mV
Bandwidth 1MHz
Unity Gain BW-Nom 1000 kHz
Voltage Gain 100dB
Average Bias Current-Max (IIB) 0.25μA
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 5.5V
Voltage - Input Offset 1.7mV
Low-Bias NO
Micropower YES
Bias Current-Max (IIB) @25C 0.25μA
Programmable Power NO
Power NO
Input Offset Current-Max (IIO) 0.05μA
Height 1.2mm
Length 5mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

LMV324QPW Overview


In the package, you will find a 14-TSSOP (0.173, 4.40mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations is approaching the 14 mark. The pins on this board total to 14 in total. Please take in mind that this instrumentation amplifier should be run at 2.7V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. The op amp ic has an array of 14 pins on it. Regarding input offset voltage, buffer amplifier rates 7mV voltage. This electronic part is recommended for mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 410μA and 10 . You should keep the voltage gain at 100dB for the time being. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. There is an operating supply voltage rating of 4 for this operational amplifier, which is rated at the manufacturer.

LMV324QPW Features


14 Pins
supply voltage of 2.7V
100dB voltage gain
Output Type: Rail-to-Rail

LMV324QPW Applications


There are a lot of Texas Instruments LMV324QPW Instrumentational OP Amps applications.

  • Test and measurement instruments
  • Multiplication circuits
  • Signal filtering
  • Image computer boards
  • Video conversion and routing
  • Precision measurement
  • Laptop
  • Fission chambers
  • Automation control systems
  • Weighing systems

Write a review

Note: HTML is not translated!
    Bad           Good