LMV324TSG-13

4 Channels 90mA per Channel 15nA 50 dB Instrumentational OP Amps 0.5μA 2.7V~5.5V ±1.35V~2.75V LMV324 14 Pins 14-TSSOP (0.173, 4.40mm Width)

Manufacturer: Diodes Incorporated
Nocochips NO: 233-LMV324TSG-13
Package: 14-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 408
Description: 4 Channels 90mA per Channel 15nA 50 dB Instrumentational OP Amps 0.5μA 2.7V~5.5V ±1.35V~2.75V LMV324 14 Pins 14-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Weight	140.30179mg
Operating Temperature	-40°C~85°C
Packaging	Digi-Reel®
Published	2017
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Packing Method	TAPE AND REEL
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	2.7V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	LMV324
Pin Count	14
Output Type	Rail-to-Rail
Power Supplies	2.7/5V
Number of Channels	4
Number of Circuits	4
Operating Supply Current	340μA
Supply Current-Max	1.1mA
Slew Rate	1V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	50 dB
Current - Input Bias	15nA
Voltage - Supply, Single/Dual (±)	2.7V~5.5V ±1.35V~2.75V
Output Current per Channel	90mA
Supply Type	Single
Input Offset Voltage (Vos)	1.7mV
Bandwidth	1MHz
Unity Gain BW-Nom	1000 kHz
Voltage Gain	100dB
Average Bias Current-Max (IIB)	0.5μA
Power Supply Rejection Ratio (PSRR)	60dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	5.5V
Low-Bias	NO
Micropower	YES
Bias Current-Max (IIB) @25C	0.25μA
Programmable Power	NO
Height	1.05mm
Length	5.1mm
Width	4.5mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Number of Pins	14

LMV324TSG-13 Overview

It is packaged in an 14-TSSOP (0.173, 4.40mm Width)-case that protects the operational amplifiers from damage. A General Purpose-type buffer amplifier is shown here. A Digi-Reel? case is used to deliver the buffer op amp. There have been a total of 14 terminations over the past year. In total, there are 14 pins on this op amp ic. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 2.7V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. It has 14 pins that make up the linear amplifier. Regarding input offset voltage, buffer amplifier rates 1.7mV voltage. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, op amp ranges -40°C~85°C. As long as the supply current of the chip does not exceed 340μA, this op amp ic can operate. 100dB should be the voltage gain. There are 4 circuits on op amps. 4 channels are available on the instrumentation amplifier. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. It is used TAPE AND REEL to pack the op amps.