LMV331M7/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LMV331 |
| Pin Count | 5 |
| Output Type | CMOS, Open-Collector, TTL |
| Operating Supply Voltage | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 120μA |
| Output Current | 84mA |
| Max Supply Current | 120μA |
| Propagation Delay | 600 ns |
| Quiescent Current | 40μA |
| Response Time | 450 ns |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 93.98dB |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 84mA @ 5V |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV331M7/NOPB Overview
To facilitate transportation, it comes packaged in 5-TSSOP, SC-70-5, SOT-353 .There is a comparator of type CMOS, Open-Collector, TTL output on this device.The chip is packaged with Tape & Reel (TR) .The device is designed with 5 terminations.The chip belongs to Comparator .In the presence of a 2.7V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .The board includes 5 pins.Electronic comparator is recommended to mount using type Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.The comparator has 5 pins.You can find more pin-to-pin solutions for your special requirements by searching LMV331 .The comparator presents a quiescent current of 40μA volts.There is a Surface Mount for mounting it on a PCB or other board.Normally, the nominal supply current should be 120μA .A current supply greater than 120μA may result in the comparator malfunctioning.Input current to the device cannot exceed 250nA .The voltage gain of the part is indicated by 93.98dB in the voltage formula.Comparator electronics is necessary to have a voltage of 3V for normal operation.This device can be used in general (for example, in ADC circuits). It is packaged in TR .
LMV331M7/NOPB Features
CMOS, Open-Collector, TTL output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 40μA
Voltage Gain: 93.98dB
LMV331M7/NOPB Applications
There are a lot of Texas Instruments LMV331M7/NOPB linear comparators applications.
- Point of load regulators
- Simple Analog-to-Digital Converters (ADCs)
- Consumer Medical Electronics
- Laptop Computers
- Lithium ion battery monitoring
- Multivibrators and High-Voltage Digital Logic Gates
- Hand-Held Electronics
- Motor drives
- Battery-Powered Electronics
- Metering Systems
