LMV339DTBR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LMV339 |
| Pin Count | 14 |
| Output Type | Open Drain |
| Number of Elements | 4 |
| Power Supplies | 2.7/5V |
| Temperature Grade | INDUSTRIAL |
| Nominal Supply Current | 300μA |
| Output Current | 84mA |
| Max Supply Current | 300μA |
| Propagation Delay | 1.5 μs |
| Quiescent Current | 350μA |
| Response Time | 200 ns |
| Voltage - Supply, Single/Dual (±) | 2.7V~5V |
| Halogen Free | Halogen Free |
| Input Offset Voltage (Vos) | 9mV |
| Voltage Gain | 93.98dB |
| Supply Voltage Limit-Max | 5.5V |
| Max Input Current | 1nA |
| Input Bias Current | 1nA |
| Current - Quiescent (Max) | 350μA |
| Voltage - Input Offset (Max) | 9mV @ 5V |
| Current - Input Bias (Max) | 0.001μA @ 5V |
| Natural Thermal Resistance | 190 °C/W |
| Current - Output (Typ) | 84mA @ 5V |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV339DTBR2G Overview
Electronic comparator is packaged in 14-TSSOP (0.173, 4.40mm Width) for convenient transportation.The comparator has an output type of Open Drain .As a result, it is designed with Tape & Reel (TR) package.There are14 terminals on the comparator.The component belongs to the Comparator family of electrical components.Supplied by 2.7V voltage, the comparator can accomplish the many demanding tasks.This is a typical comparator of type General Purpose .The total number of elements is 4 .There are 14 pins on this board.Electronic comparator is recommended that you mount the device using type Surface Mount .14 pins are present on the comparator.If you require more pin-to-pin solutions, search LMV339 for more options.The comparator presents a quiescent current of 350μA volts.Normally, the nominal supply current should be 300μA .An excess of current supply over 300μA could result in malfunction of the comparator.There is sufficient power to run the device from 2.7/5V power supplies.Electronic comparator is possible to input a maximum current of 1nA into the device.Comparator electronics follows that the voltage gain of the part is 93.98dB .There is no need to exceed 150°C in terms of temperature.Comparator electronics is not suComparator electronicsable for temperatures below -40°C .
LMV339DTBR2G Features
Open Drain output capability
General Purpose IC
Employing 4 elements
Quiescent Current: 350μA
Voltage Gain: 93.98dB
LMV339DTBR2G Applications
There are a lot of ON Semiconductor LMV339DTBR2G linear comparators applications.
- Mobile Phones
- Portable and Battery-Powered Systems
- Motor drives
- Alarm and Monitoring Circuits
- Body Control Modules
- Window Comparators
- Wearable Devices
- General-Purpose, Low-Voltage Applications
- Limit Comparators
- Infotainment & cluster
