LMV339IDE4
| Parameters | |
|---|---|
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 300μA |
| Max Supply Current | 75μA |
| Current - Output | 84mA |
| Propagation Delay | 600 ns |
| Quiescent Current | 350μA |
| Response Time | 200 ns |
| Current - Input Bias | 250nA |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 93.98dB |
| Bias Current-Max (IIB) @25C | 0.25μA |
| Max Input Current | 250nA |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 14 |
| Power Supplies | 3/5V |
LMV339IDE4 Overview
In order to make transportation easier, it is packaged in SOIC .As you can see, the comparator has14 terminals.The electrical component in this case belongs to the Comparator families.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.This is a typical comparator of type General Purpose .Electronic comparator has 14 pins.14 pins are available on the comparator.In this comparator, the quiescent current is 350μA .There is a Surface Mount on the board for mounting to a PCB or other board.For normal use of the device, the nominal supply current should be 300μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 75μA .3/5V power supplies are enough to run the device.You are allowed to input a maximum current of 250nA into the device.From the voltage formula, the voltage gain of the part is 93.98dB .In general, temperatures higher than 85°C are not recommended.Comparator electronics cannot be operated at a temperature lower than -40°C .5.5V is the maximum supply voltage of the comparator.A minimum supply voltage of 2.7V is permitted for this comparator.For the output to be of high quality, 4 channels must cooperate together.The output current of this device is rated 84mA .
LMV339IDE4 Features
General Purpose IC
Quiescent Current: 350μA
Voltage Gain: 93.98dB
LMV339IDE4 Applications
There are a lot of Texas Instruments LMV339IDE4 linear comparators applications.
- Pulse, Squarewave, and Time Delay Generators
- Power management
- Motor drives
- Self-diagnostics
- RC Timers
- General-Purpose, Low-Voltage Applications
- Automotive
- Alarm and Monitoring Circuits
- Consumer Medical Electronics
- Building automation
