LMV339IDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LMV339 |
| Pin Count | 14 |
| Output Type | Open Collector |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Nominal Supply Current | 300μA |
| Output Current | 84mA |
| Max Supply Current | 75μA |
| Propagation Delay | 600 ns |
| Quiescent Current | 350μA |
| Response Time | 600 ns |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 93.98dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Current - Quiescent (Max) | 350μA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 84mA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV339IDR Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.The comparator has a Open Collector output.The chip is packaged with Tape & Reel (TR) .14 terminals are found on the comparator.The chip belongs to Comparator .With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator can be classified as a General Purpose chip.Electronic comparator consists of 4 elements in total.The device is equipped with 14 pins.A Surface Mount mounting type is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~125°C to prevent malfunctions.14 pins are present on the comparator.You can find more pin-to-pin solutions by searching LMV339 .In this comparator, the quiescent current is 350μA .There is a Surface Mount on the board for mounting to a PCB or other board.Normal operation of the device requires a nominal supply current of 300μA .A current supply greater than 75μA may cause the comparator to malfunction.Electronic comparator is possible to input a maximum current of 250nA into the device.A voltage gain of 93.98dB can be determined from the voltage formula for the part.For normal operation, the operating supply voltage must be 5V .The device is packed in TR and is intended for general use (as an element in the ADC circuit).
LMV339IDR Features
Open Collector output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 350μA
Voltage Gain: 93.98dB
LMV339IDR Applications
There are a lot of Texas Instruments LMV339IDR linear comparators applications.
- Wireless Base Stations
- Analog front end
- Threshold Detectors
- Power Supervision
- Building automation
- Point of load regulators
- Battery-Powered Electronics
- Mobile Phones and Tablets
- High-Speed Differential Line Receiver
- Motor drives
