LMV339IDT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 259.19969mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LMV339 |
| Pin Count | 14 |
| Output Type | Open Drain |
| Operating Supply Voltage | 3V |
| Number of Elements | 4 |
| Power Supplies | 3/5V |
| Operating Supply Current | 100μA |
| Output Current | 93mA |
| Propagation Delay | 375 ns |
| Quiescent Current | 120μA |
| Supply Current-Max | 0.15mA |
| Response Time | 550 ns |
| Voltage - Supply, Single/Dual (±) | 2.7V~5V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 93.98dB |
| Supply Voltage Limit-Max | 5.5V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Current - Quiescent (Max) | 120μA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 93mA @ 5V |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV339IDT Overview
In order to facilitate transportation, it is packaged in 14-SOIC (0.154, 3.90mm Width) .Output type of this comparator is Open Drain .The part is shipped by Tape & Reel (TR) .There are 14 terminals on the comparator.The electrical component in this case belongs to the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 2.7V voltage.This is a typical comparator of type General Purpose .A total of 4 elements can be found in it.The device includes 14 pins.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.Electronic comparator has 14 pins.Search LMV339 to find more pin-to-pin solutions.The comparator displays a quiescent current of 120μA .The PCB or other board can be mounted using the Surface Mount on it.In order to operate the device, 3/5V power supplies are sufficient.There is a maximum current that can be input into the device of 250nA .Comparator electronics follows that the voltage gain of the part is 93.98dB .With a minimum current of 0.15mA , this part can be supplied.Normal operation requires 3V operating supply voltage.
LMV339IDT Features
Open Drain output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 120μA
Voltage Gain: 93.98dB
LMV339IDT Applications
There are a lot of STMicroelectronics LMV339IDT linear comparators applications.
- Battery management and protection
- Infotainment and Clusters
- Ultra-Low Power Systems
- Limit Comparators
- Consumer Medical Electronics
- Wearable Devices
- Point of load regulators
- Security Detection Systems
- Body Control Modules
- Mobile Phones
