LMV339MT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LMV339 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Collector, TTL |
| Operating Supply Voltage | 3V |
| Power Supplies | 3/5V |
| Number of Circuits | 4 |
| Nominal Supply Current | 300μA |
| Output Current | 84mA |
| Max Supply Current | 300μA |
| Propagation Delay | 600 ns |
| Quiescent Current | 300μA |
| Response Time | 450 ns |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 93.98dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Supply Voltage Limit-Max | 5.5V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 84mA @ 5V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMV339MT Overview
For convenience, it is packaged in 14-TSSOP (0.173, 4.40mm Width) .A comparator with an output type of CMOS, Open-Collector, TTL is being used.This package has been designed with Tube .The device is designed with 14 terminations.The electrical component here belongs to the Comparator family.With a 2.7V voltage supply, the comparator can perform multiple demanding tasks.A comparator of this type is typically of type General Purpose .The device includes 14 pins.In general, mounting type Surface Mount is recommended.If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .The comparator is equipped with 14 pins.You may wish to search LMV339 for more solutions that address your specific needs.There is a quiescent current of 300μA in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Normal operation of the device requires 300μA supply current.If the current supply exceeds 300μA , the comparator might be damaged.The device can be run with 3/5V power supplies.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 93.98dB .In order to operate normally, a supply voltage of 0 is required.
LMV339MT Features
CMOS, Open-Collector, TTL output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 300μA
Voltage Gain: 93.98dB
LMV339MT Applications
There are a lot of Texas Instruments LMV339MT linear comparators applications.
- General-Purpose, Low-Voltage Applications
- High-Speed Differential Line Receiver
- General Purpose Low Voltage Applications
- Point of load regulators
- Simple Analog-to-Digital Converters (ADCs)
- Lithium ion battery monitoring
- Building automation
- Body Control Modules
- Infotainment and Clusters
- DC/DC and AC/DC power supplies
