LMV339MX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LMV339 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Collector, TTL |
| Operating Supply Voltage | 3V |
| Number of Elements | 4 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 300μA |
| Output Current | 84mA |
| Max Supply Current | 300μA |
| Propagation Delay | 600 ns |
| Quiescent Current | 300μA |
| Response Time | 450 ns |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 93.98dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Supply Voltage Limit-Max | 5.5V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 84mA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV339MX/NOPB Overview
In order to facilitate transportation, it is packaged in 14-SOIC (0.154, 3.90mm Width) .Output type of this comparator is CMOS, Open-Collector, TTL .As a result, it is designed with Tape & Reel (TR) package.The comparator has 14 terminals.The electrical component in this case belongs to the Comparator families.The comparator is capable of achieving many demanding tasks when supplied with 2.7V voltage.Electronic comparator can be classified as a General Purpose chip.There are a total of 4 elements in it.Electronic comparator has 14 pins.The recommended mounting method is Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.There are 14 pins on the comparator.Search LMV339 to find more pin-to-pin solutions.The comparator displays a quiescent current of 300μA .There is a Surface Mount on the board for mounting to a PCB or other board.Normal use of the device should require a nominal supply current of 300μA .If the current supply exceeds 300μA , the comparator could malfunction.There is sufficient power to run the device from 3/5V power supplies.Input current to the device is limited to 250nA .A voltage gain of 93.98dB can be determined from the voltage formula for the part.The normal operation of the system requires 3V operating voltage.This device can be used in general (for example, in ADC circuits). It is packaged in TR .
LMV339MX/NOPB Features
CMOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 300μA
Voltage Gain: 93.98dB
LMV339MX/NOPB Applications
There are a lot of Texas Instruments LMV339MX/NOPB linear comparators applications.
- System control and monitoring
- Appliances
- Metering Systems
- Battery-Powered Electronics
- Infotainment & cluster
- Factory automation & control
- Ultra-Low Power Systems
- Power management
- Set Top Boxes
- High-Speed Sampling Circuits
