LMV341IDBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.95mm |
| Base Part Number | LMV341 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Power Supplies | 2.7/5V |
| Number of Channels | 1 |
| Operating Supply Current | 107μA |
| Nominal Supply Current | 170μA |
| Output Current | 32mA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 56 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Output Current per Channel | 113mA |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 116dB |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Low-Bias | YES |
| Micropower | YES |
| Max Frequency | 1kHz |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Programmable Power | NO |
| Power | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV341IDBVR Overview
A SOT-23-6 case is used to package the op amp. This is a General Purpose type op amp. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. There is a growing number of terminations approaching the number of 6. A total of 6 pins are located on this board. Please take in mind that op amp should be run at 2.7V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 6 pins are available on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 250μV voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . Using an 107μA supply current, this operational amplifier ics can be operated. Op amp is a member of the 116dB's 116dB family. Op amp ic has 1 channels. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. An buffer amplifier is packed in a TR-shape according to the design.
LMV341IDBVR Features
6 Pins
supply voltage of 2.7V
116dB voltage gain
Output Type: Rail-to-Rail
LMV341IDBVR Applications
There are a lot of Texas Instruments LMV341IDBVR Instrumentational OP Amps applications.
- Industrial applications including automation
- High-frequency data acquisition systems
- Signal transformation
- High/low-pass filter circuit
- Digital cameras
- earphone
- RF cable systems
- Signal amplification
- Broadcasting
- Test and measurement instruments
