LMV341IDBVRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.95mm |
| Base Part Number | LMV341 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 2.7/5V |
| Operating Supply Current | 107μA |
| Nominal Supply Current | 170μA |
| Output Current | 32mA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 56 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Output Current per Channel | 113mA |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 116dB |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Programmable Power | NO |
| Power | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV341IDBVRE4 Overview
There is a SOT-23-6 case in which the instrumentation amplifier is packaged. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 6. Linear amplifier has a total of 6 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 2.7V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. It has 6 pins that make up the linear amplifier. There is an input offset voltage of 250μV for this buffer op amp. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 107μA and 10 . Maintain 116dB as the voltage gain. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. It is possible to count 1 elements on this buffer amplifier. An buffer amplifier is packed in a TR-shape according to the design.
LMV341IDBVRE4 Features
6 Pins
supply voltage of 2.7V
116dB voltage gain
Output Type: Rail-to-Rail
LMV341IDBVRE4 Applications
There are a lot of Texas Instruments LMV341IDBVRE4 Instrumentational OP Amps applications.
- Proportional counter tubes
- Communication device
- Biopotential
- Television
- Automatic control
- Industrial applications including automation
- Automotive sensors
- Television broadcasting equipment
- Scintillation detectors
- Multimedia playback equipment
