LMV341MG/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LMV341 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Power Supplies | 2.7/5V |
| Number of Channels | 1 |
| Operating Supply Current | 107μA |
| Nominal Supply Current | 100μA |
| Output Current | 113mA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 56 dB |
| Current - Input Bias | 0.02pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 113mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 116dB |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 250μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Programmable Power | NO |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV341MG/NOPB Overview
It is packaged in an 6-TSSOP, SC-88, SOT-363-case that protects the operational amplifiers from damage. Buffer amps of this type are called General Purpose-types. Linear amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 6 terminations this year. It consists of a total of 6 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 2.7V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. It has 6 pins that make up the linear amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 4mV. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. You can run this op amp ic on 107μA . It is recommended to keep the voltage gain at 116dB at all times. As far as the device is concerned, buffer amplifier has 1 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. This linear amplifier pack is based on the TR axis.
LMV341MG/NOPB Features
6 Pins
supply voltage of 2.7V
116dB voltage gain
Output Type: Rail-to-Rail
LMV341MG/NOPB Applications
There are a lot of Texas Instruments LMV341MG/NOPB Instrumentational OP Amps applications.
- Multimedia playback equipment
- Signal operation
- Power transmission
- Laptop
- Portable media players
- Differentiator circuits
- Large motor controllers
- Fast A/D and D/A converters
- Video conversion and routing
- Automatic control
