LMV342MM/NOPB
| Parameters | |
|---|---|
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LMV342 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Nominal Supply Current | 100μA |
| Output Current | 113mA |
| Current - Supply | 107μA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 56 dB |
| Current - Input Bias | 0.02pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 116dB |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 700μV |
| Current - Output / Channel | 113mA |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
LMV342MM/NOPB Overview
Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. An op amp of this type is a General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. We are approaching the 8h termination of the year. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 2.7V volts. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The op amp ic has an array of 8 pins on it. In terms of the input offset voltage, instrumentation amplifier rates at 5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, op amp ranges -40°C~125°C. 116dB should be the voltage gain. Instrumentation amplifier has 2 channels on it. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. An buffer amplifier is packed in a TR-shape according to the design. To run supply current of buffer amplifier under 107μA.
LMV342MM/NOPB Features
8 Pins
supply voltage of 2.7V
116dB voltage gain
Output Type: Rail-to-Rail
LMV342MM/NOPB Applications
There are a lot of Texas Instruments LMV342MM/NOPB Instrumentational OP Amps applications.
- Hand-held batteries
- Home audio systems
- PDA
- Fast A/D and D/A converters
- Professional videography
- Oscilloscopes
- Television broadcasting equipment
- Band-stop filter
- Mobile phone
- Signal filtering
