LMV358IPWR

2 Channels 160mA per Channel 15nA 50 dB Instrumentational OP Amps 2.7V~5.5V ±1.35V~2.75V LMV358 8 Pins 8-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-LMV358IPWR
Package: 8-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 696
Description: 2 Channels 160mA per Channel 15nA 50 dB Instrumentational OP Amps 2.7V~5.5V ±1.35V~2.75V LMV358 8 Pins 8-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 hours ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP (0.173, 4.40mm Width)
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Cut Tape (CT)
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.7V
Terminal Pitch	0.65mm
Base Part Number	LMV358
Pin Count	8
Output Type	Rail-to-Rail
Power Supplies	3/5V
Number of Channels	2
Operating Supply Current	210μA
Nominal Supply Current	440μA
Output Current	160mA
Slew Rate	1V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	50 dB
Current - Input Bias	15nA
Voltage - Supply, Single/Dual (±)	2.7V~5.5V ±1.35V~2.75V
Output Current per Channel	160mA
Input Offset Voltage (Vos)	7mV
Bandwidth	1MHz
Unity Gain BW-Nom	1000 kHz
Voltage Gain	100dB
Power Supply Rejection Ratio (PSRR)	50dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	5.5V
Voltage - Input Offset	1.7mV
Low-Bias	NO
Micropower	YES
Programmable Power	NO
Input Offset Current-Max (IIO)	0.05μA
Height	1.2mm
Length	3mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

LMV358IPWR Overview

In order to protect the op amps, a 8-TSSOP (0.173, 4.40mm Width) case is used. An op amp of this type is a General Purpose-type. There is a Cut Tape (CT) case that is delivered with the instrumentation amplifiers. We are approaching the 8h termination of the year. Buffer amplifier has a total of 8 pins on it. Please take in mind that op amp should be run at 2.7V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. An 8-pin op amp ic is included in the package. Op amp ic rates 7mV for input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 210μA . It is recommended to keep the voltage gain at 100dB at all times. There are a total of 2 channels available on the op amps. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. For the packing of the instrumentation amplifier, TR is adopted.