LMV358IPWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LMV358 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Operating Supply Current | 210μA |
| Nominal Supply Current | 440μA |
| Output Current | 160mA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 15nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 160mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 1.7mV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.05μA |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV358IPWRG4 Overview
There is a 8-TSSOP (0.173, 4.40mm Width) case package that contains the instrumentation amplifiers. Op amps are General Purpose types of amplifier on the chip. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. There have been a total of 8 terminations over the past year. In total, there are 8 pins on this op amp ic. Please take in mind that this instrumentation amplifier should be run at 2.7V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. There are 8 pins on this chip. There is an input offset voltage of 7mV for this buffer op amp. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . Using a supply current of 210μA , this buffer op amp will be able to operate. Voltage gain should remain at 100dB. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 2. An buffer amplifier is packed in a TR-shape according to the design.
LMV358IPWRG4 Features
8 Pins
supply voltage of 2.7V
100dB voltage gain
Output Type: Rail-to-Rail
LMV358IPWRG4 Applications
There are a lot of Texas Instruments LMV358IPWRG4 Instrumentational OP Amps applications.
- Video amplifiers
- Large motor controllers
- Television
- Power generator
- Industrial control system
- High input resistance broadband
- Division circuits
- Video data acquisition
- pH (acidity)
- Home audio systems
