LMV358MM

160mA per Channel 15nA 50 dB Instrumentational OP Amps 0.5μA 2.7V~5.5V ±1.35V~2.75V LMV358 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-LMV358MM
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: -
Stock: 237
Description: 160mA per Channel 15nA 50 dB Instrumentational OP Amps 0.5μA 2.7V~5.5V ±1.35V~2.75V LMV358 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e0
Part Status	Not For New Designs
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Tin/Lead (Sn/Pb)
Subcategory	Operational Amplifier
Packing Method	TAPE AND REEL
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	LMV358
Pin Count	8
Output Type	Rail-to-Rail
Number of Elements	2
Power Supplies	3/5V
Operating Supply Current	210μA
Nominal Supply Current	210μA
Output Current	60mA
Slew Rate	1V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	50 dB
Current - Input Bias	15nA
Voltage - Supply, Single/Dual (±)	2.7V~5.5V ±1.35V~2.75V
Output Current per Channel	160mA
Input Offset Voltage (Vos)	7mV
Bandwidth	1MHz
Unity Gain BW-Nom	1000 kHz
Voltage Gain	100dB
Average Bias Current-Max (IIB)	0.5μA
Power Supply Rejection Ratio (PSRR)	50dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	5.5V
Voltage - Input Offset	1.7mV
Low-Bias	NO
Micropower	YES
Programmable Power	NO
Height Seated (Max)	1.1mm
Length	3mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

LMV358MM Overview

Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. An op amp of this type is a General Purpose-type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. In total, there are 8 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 5V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. An 8-pin op amp ic is included in the package. In terms of input offset voltage, operational amplifier rates 7mV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . A supply current of 210μA can be used to operate this linear amplifier. Keeping the voltage gain at 100dB is the best course of action. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. There are 2 elements in this buffer amplifier. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted.