LMV358M/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LMV358 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 210μA |
| Output Current | 60mA |
| Max Supply Current | 440μA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 15nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 160mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 1.7mV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 0.05μA |
| Number of Amplifiers | 1 |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV358M/NOPB Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called General Purpose-types. In the case of Tube cases, linear amplifier will be delivered. A total of 8 pins are attached to buffer op amp. Please take in mind that op amp should be run at 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. There are 8 pins on this chip. With regards to the offset voltage of the input, buffer amplifier is rated at 7mV. The mounting type that is recommended for this electrical part is Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. Maintain 100dB as the voltage gain. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. There are a total of 2 elements in this linear amplifier. The linear amplifier has 1 amplifiers.
LMV358M/NOPB Features
8 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
LMV358M/NOPB Applications
There are a lot of Texas Instruments LMV358M/NOPB Instrumentational OP Amps applications.
- Portable media players
- Instrumentation
- ECG equipment
- Signal filtering
- Industrial applications including automation
- Signal operation
- Automotive sensors
- Test equipment
- Car stereo
- Tablets
