LMV358MUTAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFDFN |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.4mm |
| Base Part Number | LMV358 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Operating Supply Current | 210μA |
| Nominal Supply Current | 440μA |
| Output Current | 160mA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 1nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 160mA |
| Input Offset Voltage (Vos) | 9mV |
| Bandwidth | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 1.7mV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1MHz |
| Height | 500μm |
| Length | 1.8mm |
| Width | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV358MUTAG Overview
In the package, you will find a 8-UFDFN-case to contain the op amp ic. This is a General Purpose type op amp. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. The total number of pins on linear amplifier is 8. As a reminder, this buffer op amp should be powered by 2.7V battery and that the battery should be inserted in the amplifier. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 8 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 9mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . A supply current of 210μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 100dB. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. Op amp has total of 2 elements. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps.
LMV358MUTAG Features
8 Pins
supply voltage of 2.7V
100dB voltage gain
Output Type: Rail-to-Rail
LMV358MUTAG Applications
There are a lot of ON Semiconductor LMV358MUTAG Instrumentational OP Amps applications.
- Proportional counter tubes
- Car stereo
- Television
- Medical imaging
- Active probe
- ECG equipment
- Polarized electrodes
- PDA
- Logarithmic operation circuits
- Subtraction operation circuits
