LMV358QDR

160mA per Channel 15nA 50 dB Instrumentational OP Amps 2.7V~5.5V ±1.35V~2.75V LMV358 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-LMV358QDR
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 663
Description: 160mA per Channel 15nA 50 dB Instrumentational OP Amps 2.7V~5.5V ±1.35V~2.75V LMV358 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.7V
Base Part Number	LMV358
Pin Count	8
Output Type	Rail-to-Rail
Number of Elements	2
Power Supplies	3/5V
Operating Supply Current	210μA
Nominal Supply Current	440μA
Output Current	160mA
Max Supply Current	340μA
Slew Rate	1V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	50 dB
Current - Input Bias	15nA
Voltage - Supply, Single/Dual (±)	2.7V~5.5V ±1.35V~2.75V
Output Current per Channel	160mA
Input Offset Voltage (Vos)	7mV
Bandwidth	1MHz
Unity Gain BW-Nom	1000 kHz
Voltage Gain	100dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	5.5V
Voltage - Input Offset	1.7mV
Low-Bias	NO
Micropower	YES
Programmable Power	NO
Power	NO
Input Offset Current-Max (IIO)	0.05μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	BIPOLAR
Terminal Position	DUAL

LMV358QDR Overview

The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a General Purpose-type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations approaches 8. A total of 8 pins are located on this board. It would be helpful if you could remember that this op amp ic should be powered by an 2.7V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. An 8-pin op amp ic is included in the package. There is an input offset voltage of 7mV for this buffer op amp. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . Using an 210μA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain at 100dB. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The op amp is rated for an operating supply voltage of 2. TR is adopted to pack the instrumentation amplifier.