LMV393DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin (Sn) |
| Max Operating Temperature | 150°C |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Base Part Number | LMV393 |
| Pin Count | 8 |
| Output Type | Open Drain |
| Operating Supply Voltage | 3V |
| Number of Elements | 2 |
| Temperature Grade | INDUSTRIAL |
| Nominal Supply Current | 200μA |
| Output Current | 84mA |
| Max Supply Current | 200μA |
| Propagation Delay | 1.5 μs |
| Quiescent Current | 250μA |
| Response Time | 200 ns |
| Voltage - Supply, Single/Dual (±) | 2.7V~5V |
| Halogen Free | Halogen Free |
| Input Offset Voltage (Vos) | 9mV |
| Voltage Gain | 93.98dB |
| Supply Voltage Limit-Max | 5.5V |
| Max Input Current | 1nA |
| Input Bias Current | 1nA |
| Current - Quiescent (Max) | 250μA |
| Voltage - Input Offset (Max) | 9mV @ 5V |
| Current - Input Bias (Max) | 0.001μA @ 5V |
| Natural Thermal Resistance | 212 °C/W |
| Current - Output (Typ) | 84mA @ 5V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV393DR2G Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .There is a comparator of type Open Drain output on this device.We ship the part through Tape & Reel (TR) .Electronic comparator is possible to find the 8 terminals of the comparator.Electronic comparator is a part of Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 2.7V voltage.The type of the chip can be classified as General Purpose .Electronic comparator consists of 2 elements in total.A total of 8 pins are included.Electronic comparator is recommended that you mount the device using type Surface Mount .There are 8 pins on the comparator.Alternatively, you may search for LMV393 to find more pin-to-pin solutions for your specific needs.In this comparator, the quiescent current is 250μA .Normal use of the device should require a nominal supply current of 200μA .Current supply exceeding 200μA could cause disfunction of the compartator.There is a maximum current that can be input into the device of 1nA .From the voltage formula, the voltage gain of the part is 93.98dB .Comparator electronics is not recommended to operate the system at a temperature above 150°C .The normal operation of the system requires 3V operating voltage.
LMV393DR2G Features
Open Drain output capability
General Purpose IC
Employing 2 elements
Quiescent Current: 250μA
Voltage Gain: 93.98dB
LMV393DR2G Applications
There are a lot of ON Semiconductor LMV393DR2G linear comparators applications.
- Point of load regulators
- Zero-Crossing Detectors
- Zero-Crossing Detectors
- Wireless Base Stations
- Battery management and protection
- Window Comparators
- Window Comparators, Multivibrators
- Automotive
- Wide Range VCO; MOS Clock Timers
- Motor drives
