LMV393ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LMV393 |
| Pin Count | 8 |
| Output Type | Open Collector |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 200μA |
| Output Current | 84mA |
| Max Supply Current | 100μA |
| Propagation Delay | 600 ns |
| Quiescent Current | 250μA |
| Response Time | 600 ns |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 5mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 93.98dB |
| Supply Voltage Limit-Max | 5.5V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Current - Quiescent (Max) | 250μA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 84mA @ 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV393ID Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.A comparator with a Open Collector output is used here.This device is designed in Tube case.The comparator has a total of 8 terminals.Electronic comparator is a part of Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.In general, the chip type can be classified as General Purpose .This is a 2 element comparator.The device contains 8 pins.Electronic comparator is recommended that the mounting type be Surface Mount .A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.There are 8 pins on the comparator.You can search LMV393 if you are looking for more pin-to-pin solutions.This comparator presents a quiescent current of 250μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 200μA .An excess of current supply over 100μA could result in malfunction of the comparator.3/5V power supplies are enough to run the device.Electronic comparator is possible to input a maximum current of 250nA into the device.A voltage gain of 93.98dB can be determined from the voltage formula for the part.
LMV393ID Features
Open Collector output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 250μA
Voltage Gain: 93.98dB
LMV393ID Applications
There are a lot of Texas Instruments LMV393ID linear comparators applications.
- Ultra-Low Power Systems
- Multivibrators and High-Voltage Digital Logic Gates
- Portable and Battery-Powered Systems
- Battery management and protection
- Set Top Boxes
- DC/DC and AC/DC power supplies
- Motor drives
- Hand-Held Electronics
- Mobile Phones
- Zero-Crossing Detectors
