LMV393IDGKR
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LMV393 |
| Pin Count | 8 |
| Output Type | Open Collector |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Nominal Supply Current | 100μA |
| Output Current | 84mA |
| Max Supply Current | 100μA |
| Propagation Delay | 600 ns |
| Quiescent Current | 250μA |
| Response Time | 600 ns |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 5mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 93.98dB |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Current - Quiescent (Max) | 250μA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 84mA @ 5V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
LMV393IDGKR Overview
A convenient transport package is provided in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .The comparator has a type Open Collector output.The part will be shipped by Cut Tape (CT) .You can find 8 terminals of the comparator.Electronic comparator is a part of Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .Electronic comparator can be classified as a General Purpose chip.In total, it contains 2 elements.Electronic comparator includes 8 pins.The recommended mounting type is Surface Mount .A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.There are 8 pins on the comparator.In order to find a solution that meets your specific needs, search LMV393 for more pin-to-pin solutions.The comparator displays a quiescent current of 250μA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.Electronic comparator is recommended that the nominal supply current be 100μA in order to use the device normally.An excess of current supply over 100μA could result in malfunction of the comparator.Input current to the device cannot exceed 250nA .The voltage gain of the part is indicated by 93.98dB in the voltage formula.Comparator electronics is necessary to have an operating supply voltage of 5V for normal operation.Packed in TR , this device is for general uses (often in ADC circuits).
LMV393IDGKR Features
Open Collector output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 250μA
Voltage Gain: 93.98dB
LMV393IDGKR Applications
There are a lot of Texas Instruments LMV393IDGKR linear comparators applications.
- Automatic Test Equipment
- Window Comparators
- Ultra-Low Power Systems
- System control and monitoring
- Portable and Battery-Powered Systems
- DC/DC and AC/DC power supplies
- Mobile Phones and Tablets
- Set Top Boxes
- Point of load regulators
- RC Timers
