LMV393IPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LMV393 |
| Pin Count | 8 |
| Output Type | Open Collector |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 200μA |
| Output Current | 84mA |
| Max Supply Current | 100μA |
| Propagation Delay | 600 ns |
| Quiescent Current | 250μA |
| Response Time | 600 ns |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 5mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 93.98dB |
| Supply Voltage Limit-Max | 5.5V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Current - Quiescent (Max) | 250μA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 84mA @ 5V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV393IPW Overview
A convenient transport package is provided in 8-TSSOP (0.173, 4.40mm Width) .There is a comparator of type Open Collector output on this device.The chip is packaged with Tube .There are 8 terminals on the comparator.The electrical component in this case belongs to the Comparator families.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.A comparator of this type is typically of type General Purpose .Electronic comparator consists of 2 elements in total.There are 8 pins on this board.A Surface Mount mounting type is recommended.As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.The comparator has 8 pins.Alternatively, you may search for LMV393 to find more pin-to-pin solutions for your specific needs.The comparator presents a quiescent current of 250μA volts.A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current be 200μA in order to use the device normally.A supply current exceeding 100μA may result in the comparator malfunctioning.This device requires 3/5V power supplies to operate.There is a maximum current that can be input into the device of 250nA .According to the voltage formula, the part has a voltage gain of 93.98dB .
LMV393IPW Features
Open Collector output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 250μA
Voltage Gain: 93.98dB
LMV393IPW Applications
There are a lot of Texas Instruments LMV393IPW linear comparators applications.
- Point of load regulators
- High-Speed Sampling Circuits
- Wearable Devices
- Wireless Base Stations
- Mobile Communications
- Appliances
- Security Detection Systems
- General Purpose Low Voltage Applications
- General-Purpose Portable Devices
- RC Timers
