LMV393MM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LMV393 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Collector, TTL |
| Operating Supply Voltage | 3V |
| Power Supplies | 3/5V |
| Number of Circuits | 2 |
| Nominal Supply Current | 200μA |
| Output Current | 84mA |
| Max Supply Current | 200μA |
| Propagation Delay | 600 ns |
| Quiescent Current | 300μA |
| Response Time | 450 ns |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 93.98dB |
| Supply Voltage Limit-Max | 5.5V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Current - Quiescent (Max) | 300μA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 84mA @ 5V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMV393MM Overview
The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) in order to facilitate transportation.This comparator is of the CMOS, Open-Collector, TTL output type.The chip is packaged with Tape & Reel (TR) .The comparator has 8 terminals.The electrical component here belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 2.7V .In terms of type, this is a typical General Purpose comparator.Electronic comparator has 8 pins.Surface Mount universial mout for easy adapting.A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.8 pins are present on the comparator.In order to find a solution that meets your specific needs, search LMV393 for more pin-to-pin solutions.The comparator presents a quiescent current of 300μA volts.The PCB or other board can be mounted using the Surface Mount on it.For normal use of the device, the nominal supply current should be 200μA .Current supply exceeding 200μA could cause disfunction of the compartator.The device can be powered by 3/5V power supplies.Input current to the device is limited to 250nA .In accordance with the voltage formula, the part's voltage gain is 93.98dB .Comparator electronics is necessary to have an operating supply voltage of 3V for normal operation.Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
LMV393MM Features
CMOS, Open-Collector, TTL output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 300μA
Voltage Gain: 93.98dB
LMV393MM Applications
There are a lot of Texas Instruments LMV393MM linear comparators applications.
- Building automation
- Automotive
- Wide Range VCO; MOS Clock Timers
- Mobile Phones and Tablets
- Appliances
- Portable Battery Monitoring
- System control and monitoring
- Mobile Communications
- Window Comparators, Multivibrators
- Set Top Boxes
