LMV551MG/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | LMV551 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 37μA |
| Nominal Supply Current | 37μA |
| Output Current | 10mA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 76 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 3MHz |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 90dB |
| Average Bias Current-Max (IIB) | 0.038μA |
| Power Supply Rejection Ratio (PSRR) | 78dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.038μA |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 0.02μA |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV551MG/NOPB Overview
The linear amplifier is packaged in a 5-TSSOP, SC-70-5, SOT-353 case. Op amps are General Purpose types of amplifier on the chip. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. The number of terminations is approaching the 5 mark. Linear amplifier has a total of 5 pins. As a reminder, this buffer op amp should be powered by 3V battery and that the battery should be inserted in the amplifier. It should be noted that this op amp is a type of Operational Amplifier device. The op amp ic has an array of 5 pins on it. In terms of input offset voltage, operational amplifier rates 3mV. For this electrical component, Surface Mount is the recommended mounting type. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureAn 37μA volt supply current is needed for this linear amplifier to operate. 90dB should be the voltage gain. The op amp ic has 1 channels on it. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. A TR-shaped amplifier is used to pack the buffer amps.
LMV551MG/NOPB Features
5 Pins
supply voltage of 3V
90dB voltage gain
Output Type: Rail-to-Rail
LMV551MG/NOPB Applications
There are a lot of Texas Instruments LMV551MG/NOPB Instrumentational OP Amps applications.
- Portable docking station
- Image computer boards
- Cinema or auditorium audio system
- PDA
- Radiation thermometry transducers
- Industrial control system
- Proportional operation circuits
- Automotive sensors
- Biopotential
- pH (acidity)
