LMV604MTX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | LMV604 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5V |
| Number of Circuits | 4 |
| Operating Supply Current | 107μA |
| Nominal Supply Current | 107μA |
| Output Current | 113mA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 0.02pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 113mA |
| Input Offset Voltage (Vos) | 700μV |
| Gain Bandwidth Product | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 116dB |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Wideband | NO |
| Power | NO |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV604MTX/NOPB Overview
A 14-TSSOP (0.173, 4.40mm Width) case is used to package the op amp. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. A total of 14 terminations have been reported in the past few weeks. The total number of pins on linear amplifier is 14. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. Instrumentation amplifier is a part of Operational Amplifier. The buffer op amp includes 14 pins. As far as the input offset voltage is concerned, linear amplifier rates at 700μV. Surface Mount is the recommended mounting type of operational amplifiers. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . Operational amplifier can operate supply current at 107μA. It is recommended to keep the voltage gain at 116dB at all times. During the manufacturing process, this buffer amplifier is divided into 4 circuits. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The linear amplifier is packaged by using a TR axis.
LMV604MTX/NOPB Features
14 Pins
supply voltage of 5V
116dB voltage gain
Output Type: Rail-to-Rail
LMV604MTX/NOPB Applications
There are a lot of Texas Instruments LMV604MTX/NOPB Instrumentational OP Amps applications.
- Band-pass filter
- Integrator circuits
- Communication
- Logarithmic operation circuits
- Polarized electrodes
- Proportional counter tubes
- Signal amplification
- Portable media players
- Radiation thermometry transducers
- single/dual op amp sum and difference circuits
