Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
14 |
Operating Temperature |
-40°C~125°C |
Packaging |
Bulk |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TUBE |
Technology |
BICMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
2.7V |
Base Part Number |
LMV614 |
Pin Count |
14 |
Output Type |
Rail-to-Rail |
Number of Elements |
4 |
Power Supplies |
2/5V |
Operating Supply Current |
116μA |
Nominal Supply Current |
105μA |
Output Current |
30mA |
Slew Rate |
0.42V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
50 dB |
Current - Input Bias |
14nA |
Voltage - Supply, Single/Dual (±) |
1.8V~5.5V |
Output Current per Channel |
100mA |
Input Offset Voltage (Vos) |
5.5mV |
Gain Bandwidth Product |
1.5MHz |
Unity Gain BW-Nom |
1500 kHz |
Voltage Gain |
100dB |
Average Bias Current-Max (IIB) |
0.035μA |
Power Supply Rejection Ratio (PSRR) |
100dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6V |
Voltage - Input Offset |
1mV |
Low-Bias |
NO |
Micropower |
YES |
Max Frequency |
10kHz |
Bias Current-Max (IIB) @25C |
0.035μA |
Programmable Power |
NO |
Wideband |
NO |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LMV614MT/NOPB Overview
In order to protect the op amps, a 14-TSSOP (0.173, 4.40mm Width) case is used. The instrumentation amplifier in this picture is of the General Purpose-type. In the case of Bulk cases, linear amplifier will be delivered. We are approaching the 14h termination of the year. Linear amplifier has a total of 14 pins. It is important to remember that this op amp should be operated at a voltage of 2.7V volts. It should be noted that this op amp is a type of Operational Amplifier device. There are 14 pins on this chip. Regarding input offset voltage, op amp rates 5.5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . It is possible to operate this buffer amplifier from a supply current of 116μA . You should keep the voltage gain at 100dB for the time being. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. Op amp has total of 4 elements. For the packing of the instrumentation amplifier, TUBE is adopted.
LMV614MT/NOPB Features
14 Pins
supply voltage of 2.7V
100dB voltage gain
Output Type: Rail-to-Rail
LMV614MT/NOPB Applications
There are a lot of Texas Instruments LMV614MT/NOPB Instrumentational OP Amps applications.
- Portable media players
- Video computer boards
- Gaming industry
- Thermocouples
- PDA
- Exponential operation circuits
- Computer workstations
- Radar
- Scintillation detectors
- Polarized electrodes