LMV641MG/NOPB
| Parameters | |
|---|---|
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 30μV |
| Low-Bias | NO |
| Micropower | YES |
| Max Frequency | 1kHz |
| Programmable Power | NO |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Base Part Number | LMV641 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 158μA |
| Nominal Supply Current | 158μA |
| Output Current | 26mA |
| Slew Rate | 2.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 94 dB |
| Current - Input Bias | 70nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 112mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 104dB |
| Power Supply Rejection Ratio (PSRR) | 94.5dB |
LMV641MG/NOPB Overview
The linear amplifier is packaged in a 5-TSSOP, SC-70-5, SOT-353 case which makes it easy for the consumer to handle. An op amp ic of the General Purpose type. A Tape & Reel (TR) case is used to deliver the buffer op amp. There have been a total of 5 terminations over the past year. Linear amplifier has a total of 5 pins. This linear amplifier should be powered by an 10V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 5 pins are available on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 500μV. This electronic part is recommended for mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . As long as the supply current of the chip does not exceed 158μA, this op amp ic can operate. Maintain 104dB as the voltage gain. There are 1 channels on the operational amplifiers. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. This linear amplifier pack is based on the TR axis.
LMV641MG/NOPB Features
5 Pins
supply voltage of 10V
104dB voltage gain
Output Type: Rail-to-Rail
LMV641MG/NOPB Applications
There are a lot of Texas Instruments LMV641MG/NOPB Instrumentational OP Amps applications.
- Automatic control
- Proportional operation circuits
- Computer workstations
- Proportional counter tubes
- Radar
- Weak signal detection
- Commercial audio systems
- Tablets
- Fission chambers
- Multiplication circuits
