LMV651MFX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | LMV651 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 116μA |
| Nominal Supply Current | 116μA |
| Output Current | 18.5mA |
| Slew Rate | 3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 80nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Gain Bandwidth Product | 12MHz |
| Unity Gain BW-Nom | 12000 kHz |
| Voltage Gain | 94dB |
| Power Supply Rejection Ratio (PSRR) | 87dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 100μV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Wideband | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV651MFX/NOPB Overview
Packaged in a SC-74A, SOT-753 case, the buffer op amp is ready to use. There are two types of operational amplifiers in this circuit. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be 5 terminations in the next few months. In total, there are 5 pins on this op amp ic. As a reminder, this buffer op amp should be powered by 3V battery and that the battery should be inserted in the amplifier. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 5 pins are included on the operational amplifiers. There is an input offset voltage of 1.5mV for this buffer op amp. This electrical part should be mounted using type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureThis op amp can operate from a supply current at 116μA. There should be no change in the voltage gain. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The total number of elements in this buffer amplifier is 1. The instrumentation amplifier is packed in the form of TR.
LMV651MFX/NOPB Features
5 Pins
supply voltage of 3V
94dB voltage gain
Output Type: Rail-to-Rail
LMV651MFX/NOPB Applications
There are a lot of Texas Instruments LMV651MFX/NOPB Instrumentational OP Amps applications.
- Mobile phone
- Exponential operation circuits
- Instrumentation
- High/low-pass filter circuit
- Communication
- Automotive sensors
- earphone
- Band-stop filter
- Logarithmic operation circuits
- Professional videography
