LMV711IDCKR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LMV711 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 2.7/5V |
| Operating Supply Current | 1.17mA |
| Nominal Supply Current | 1.7mA |
| Output Current | 40mA |
| Slew Rate | 5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 4pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 5MHz |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 123dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 400μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Power | NO |
| Length | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LMV711IDCKR Overview
It is packaged in an 6-TSSOP, SC-88, SOT-363-case that protects the operational amplifiers from damage. An op amp ic of the General Purpose type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. There have been a total of 6 terminations over the past year. Buffer amplifier has a total of 6 pins. I would like to remind you that this buffer op amp should be powered by an 2.7V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. In total, the buffer amplifier consists of 6 pins. In terms of input offset voltage, operational amplifier rates 3mV. This electronic part is best mounted with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 1.17mA and 10 . Voltage gain should remain at 123dB. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. A voltage rating of 1 is indicated for the op amp's operating supply voltage. The instrumentation amplifier is packed in the form of TAPE AND REEL.
LMV711IDCKR Features
6 Pins
supply voltage of 2.7V
123dB voltage gain
Output Type: Rail-to-Rail
LMV711IDCKR Applications
There are a lot of Texas Instruments LMV711IDCKR Instrumentational OP Amps applications.
- E-book readers
- Communication device
- Automotive sensors
- Signal transformation
- Weak signal detection
- Video amplifiers
- Medical instruments
- Multiplication circuits
- Biopotential
- Broadcasting
