LMV716MM
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LMV716 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 1.6mA |
| Nominal Supply Current | 1.6mA |
| Output Current | 20mA |
| Slew Rate | 5.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 0.6pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5V |
| Output Current per Channel | 41mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 2MHz |
| Gain Bandwidth Product | 5MHz |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 122dB |
| Average Bias Current-Max (IIB) | 0.00013μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 1.6mV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.000115μA |
| Programmable Power | NO |
| Height | 860μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMV716MM Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. A General Purpose-type buffer amplifier is shown here. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 8. A total of 8 pins are attached to buffer op amp. Please take in mind that this instrumentation amplifier should be run at 3.3V. It should be noted that this op amp is a type of Operational Amplifier device. Linear amplifier includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 5mV. For this electrical component, Surface Mount is the recommended mounting type. With regard to operating temperature, op amp ranges -40°C~85°C. A supply current of 1.6mA can be used to operate this linear amplifier. 122dB should remain the voltage gain. On the buffer amps, there are 2 channels that can be used. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted.
LMV716MM Features
8 Pins
supply voltage of 3.3V
122dB voltage gain
Output Type: Rail-to-Rail
LMV716MM Applications
There are a lot of Texas Instruments LMV716MM Instrumentational OP Amps applications.
- Industrial control system
- Division circuits
- Precision measurement
- Radar
- Power transmission
- Professional videography
- Strain gauges
- Ultrasound transducers
- Car stereo
- Laptop
