LMV7219M5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LMV7219 |
| Pin Count | 5 |
| Output Type | Push-Pull, Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Elements | 1 |
| Nominal Supply Current | 1.1mA |
| Output Current | 68mA |
| Max Supply Current | 1.8mA |
| Propagation Delay | 20 ns |
| Quiescent Current | 1.8mA |
| Max Output Voltage | 5V |
| Response Time | 12 ns |
| Common Mode Rejection Ratio | 85 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5V |
| Input Offset Voltage (Vos) | 6mV |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Input Current | 950nA |
| Input Bias Current | 950nA |
| Voltage - Input Offset (Max) | 6mV @ 5V |
| Current - Input Bias (Max) | 0.95μA @ 5V |
| Hysteresis | 7.5mV |
| CMRR, PSRR (Typ) | 85dB CMRR, 85dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMV7219M5 Overview
For convenience, it is packaged in SC-74A, SOT-753 .There is a Push-Pull, Rail-to-Rail output type for this comparator.We ship the part through Tape & Reel (TR) .The comparator has 5 terminals.Electronic comparator is a component of the Comparator family.In the presence of a 2.7V voltage, the comparator is capable of accomplishing a variety of demanding tasks.In general, the chip type can be classified as General Purpose .A total of 1 elements can be found in it.As a result, it contains 5 pins.The type of mounting recommended is Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.Electronic comparator has 5 pins.You may wish to search LMV7219 for more solutions that address your specific needs.This comparator presents a quiescent current of 1.8mA .The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 1.1mA .A current supply greater than 1.8mA may cause the comparator to malfunction.Electronic comparator is possible to input a maximum of 950nA current into the device.Normal operation requires 3V operating supply voltage.This device can be used in general (for example, in ADC circuits). It is packaged in TR .
LMV7219M5 Features
Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1.8mA
LMV7219M5 Applications
There are a lot of Texas Instruments LMV7219M5 linear comparators applications.
- Alarm and Monitoring Circuits
- Industrial
- Window Comparators
- Consumer Medical Electronics
- Notebooks and PDAs
- Ultra-Low Power Systems
- Battery-Powered Electronics
- Zero-Crossing Detectors
- Portable Battery Monitoring
- High-Speed Sampling Circuits
