LMV7219M5/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 200.998119mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LMV7219 |
| Pin Count | 5 |
| Output Type | Push-Pull, Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Elements | 1 |
| Operating Supply Current | 1.8mA |
| Nominal Supply Current | 1.8mA |
| Output Current | 68mA |
| Max Supply Current | 1.8mA |
| Propagation Delay | 7 ns |
| Quiescent Current | 900μA |
| Turn On Delay Time | 7 ns |
| Max Output Voltage | 5V |
| Response Time | 12 ns |
| Common Mode Rejection Ratio | 85 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5V |
| Supply Type | Single |
| Input Offset Voltage (Vos) | 6mV |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Input Current | 950nA |
| Input Bias Current | 950nA |
| Voltage - Input Offset (Max) | 6mV @ 5V |
| Current - Input Bias (Max) | 0.95μA @ 5V |
| Hysteresis | 7.5mV |
| CMRR, PSRR (Typ) | 85dB CMRR, 85dB PSRR |
| Propagation Delay (Max) | 20ns |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV7219M5/NOPB Overview
In order to make transportation easier, it is packaged in SC-74A, SOT-753 .The comparator has a Push-Pull, Rail-to-Rail output.This package has been designed with Cut Tape (CT) .The comparator has a total of 5 terminals.Electronic comparator is a part of Comparator family.Supplied by 2.7V voltage, the comparator can accomplish the many demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .The total number of elements is 1 .Electronic comparator has 5 pins.The type of mounting recommended is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .This comparator has 5 pins.You can find more pin-to-pin solutions for your special requirements by searching LMV7219 .In this comparator, the quiescent current is 900μA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.Electronic comparator is recommended that the nominal supply current for the device be set to 1.8mA .If the current supply exceeds 1.8mA , the comparator could malfunction.The maximal current your can input into the device is 950nA .For normal operation, there should be 3V operating supply voltage applied.The device is acceptable to pack by TR .
LMV7219M5/NOPB Features
Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 900μA
LMV7219M5/NOPB Applications
There are a lot of Texas Instruments LMV7219M5/NOPB linear comparators applications.
- Industrial
- High-Speed Sampling Circuits
- Security Detection Systems
- Self-diagnostics
- Battery management and protection
- Mobile Phones and Tablets
- System control and monitoring
- Simple Analog-to-Digital Converters (ADCs)
- Laptop Computers
- Power Supervision
