LMV7219M5X/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LMV7219 |
| Pin Count | 5 |
| Output Type | Push-Pull, Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Elements | 1 |
| Nominal Supply Current | 1.8mA |
| Output Current | 68mA |
| Max Supply Current | 1.8mA |
| Propagation Delay | 20 ns |
| Quiescent Current | 1.8mA |
| Response Time | 12 ns |
| Common Mode Rejection Ratio | 85 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5V |
| Input Offset Voltage (Vos) | 6mV |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Input Current | 950nA |
| Input Bias Current | 950nA |
| Voltage - Input Offset (Max) | 6mV @ 5V |
| Current - Input Bias (Max) | 0.95μA @ 5V |
| Hysteresis | 7.5mV |
| CMRR, PSRR (Typ) | 85dB CMRR, 85dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV7219M5X/NOPB Overview
In order to facilitate transportation, it is packaged in SC-74A, SOT-753 .Output type Push-Pull, Rail-to-Rail is used for this comparator.The part is shipped by Tape & Reel (TR) .The comparator has 5 terminals.The electrical component here belongs to the Comparator family.With a 2.7V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator can be classified as a General Purpose chip.This element consists of 1 elements in total.The pinout of the component starts from 5 pins it has.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.Electronic comparator has 5 pins.In case you are looking for more pin-to-pin solutions, you may want to search LMV7219 .There is a quiescent current of 1.8mA in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Electronic comparator is recommended that the nominal supply current of the device be 1.8mA .If the current supply exceeds 1.8mA , the comparator could malfunction.You are allowed to input a maximum current of 950nA into the device.The operating supply voltage for normal operation should be 3V .The device is packed in TR and is intended for general use (as an element in the ADC circuit).
LMV7219M5X/NOPB Features
Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1.8mA
LMV7219M5X/NOPB Applications
There are a lot of Texas Instruments LMV7219M5X/NOPB linear comparators applications.
- Metering Systems
- Multivibrators and High-Voltage Digital Logic Gates
- Automotive
- Point of load regulators
- System control and monitoring
- Security Detection Systems
- Power Supervision
- Factory automation & control
- Zero-Crossing Detectors
- Building automation
