banner_page

LMV7219M7/NOPB

Surface Mount Cut Tape (CT) 68mA mA 12 ns μs Linear Comparators 950nA pA 1.8mA μA 6mV mV Surface Mount


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LMV7219M7/NOPB
  • Package: 5-TSSOP, SC-70-5, SOT-353
  • Datasheet: -
  • Stock: 905
  • Description: Surface Mount Cut Tape (CT) 68mA mA 12 ns μs Linear Comparators 950nA pA 1.8mA μA 6mV mV Surface Mount (Kg)

Details

Tags

Parameters
Pin Count 5
Output Type Push-Pull, Rail-to-Rail
Operating Supply Voltage 3V
Number of Circuits 1
Nominal Supply Current 1.8mA
Output Current 68mA
Max Supply Current 1.8mA
Propagation Delay 20 ns
Quiescent Current 900μA
Response Time 12 ns
Common Mode Rejection Ratio 85 dB
Voltage - Supply, Single/Dual (±) 2.7V~5V
Input Offset Voltage (Vos) 6mV
Power Supply Rejection Ratio (PSRR) 85dB
Max Input Current 950nA
Input Bias Current 950nA
Voltage - Input Offset (Max) 6mV @ 5V
Current - Input Bias (Max) 0.95μA @ 5V
Hysteresis 7.5mV
CMRR, PSRR (Typ) 85dB CMRR, 85dB PSRR
Height 1.1mm
Length 2mm
Width 1.25mm
Thickness 900μm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 5-TSSOP, SC-70-5, SOT-353
Number of Pins 5
Operating Temperature -40°C~85°C
Packaging Cut Tape (CT)
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
Termination SMD/SMT
ECCN Code EAR99
Type General Purpose
Subcategory Comparator
Packing Method TR
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.7V
Base Part Number LMV7219

LMV7219M7/NOPB Overview


A convenient packaging is provided in the form of 5-TSSOP, SC-70-5, SOT-353 .There is a comparator of type Push-Pull, Rail-to-Rail output on this device.As a result, it is designed with Cut Tape (CT) package.As you can see, the comparator has5 terminals.Electronic comparator is a component of the Comparator family.A comparator supplied with 2.7V voltage can complete many demanding tasks.Electronic comparator can be classified as a General Purpose chip.A total of 5 pins are included.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.5 pins are available on the comparator.You can search LMV7219 if you are looking for more pin-to-pin solutions.A quiescent current of 900μA is displayed by this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normal operation of the device requires a nominal supply current of 1.8mA .Current supply exceeding 1.8mA could cause disfunction of the compartator.There is a maximum current that can be input into the device of 950nA .Normal operation requires 3V operating supply voltage.This device is usually used in ADC circuits (packaged in TR ).

LMV7219M7/NOPB Features


Push-Pull, Rail-to-Rail output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 900μA

LMV7219M7/NOPB Applications


There are a lot of Texas Instruments LMV7219M7/NOPB linear comparators applications.

  • General-Purpose Portable Devices
  • Wireless Base Stations
  • Portable Battery Monitoring
  • Power Supervision
  • Building automation
  • Notebooks and PDAs
  • System control and monitoring
  • Automotive
  • Point of load regulators
  • Motor drives

Write a review

Note: HTML is not translated!
    Bad           Good