LMV721M5/NOPB
| Parameters | |
|---|---|
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMV721 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Nominal Supply Current | 1.03mA |
| Output Current | 24mA |
| Slew Rate | 5.25V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 260nA |
| Voltage - Supply, Single/Dual (±) | 2.2V~5.5V ±1.1V~2.25V |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 94dB |
| Average Bias Current-Max (IIB) | 0.26μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 80μV |
LMV721M5/NOPB Overview
In the package, you will find a SC-74A, SOT-753-case to contain the op amp ic. A General Purpose-type buffer amplifier is shown here. Instrumentation amplifier is delivered in a Cut Tape (CT) case. It is estimated that there will be at least 5 terminations this year. Buffer amplifier has a total of 5 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 5 pins are located on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 3mV. This electronic part is best mounted with type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. You should keep the voltage gain at 94dB for the time being. On this instrumentation amplifier, there are 1 circuits that are connected together. On the buffer amps, there are 1 channels that can be used. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. An buffer amplifier is packed in a TR-shape according to the design.
LMV721M5/NOPB Features
5 Pins
supply voltage of 5V
94dB voltage gain
Output Type: Rail-to-Rail
LMV721M5/NOPB Applications
There are a lot of Texas Instruments LMV721M5/NOPB Instrumentational OP Amps applications.
- Switching amplifier
- Strain gauges
- Automotive sensors
- Commercial audio systems
- Polarized electrodes
- Medical instruments
- MP3
- High-frequency data acquisition systems
- E-book readers
- Video conversion and routing
