LMV721M7/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMV721 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 1.03mA |
| Nominal Supply Current | 1.03mA |
| Output Current | 52.6mA |
| Slew Rate | 5.25V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 260nA |
| Voltage - Supply, Single/Dual (±) | 2.2V~5.5V ±1.1V~2.25V |
| Output Current per Channel | 52.6mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 94dB |
| Average Bias Current-Max (IIB) | 0.26μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 80μV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV721M7/NOPB Overview
The linear amplifier is packaged in a 5-TSSOP, SC-70-5, SOT-353 case which makes it easy for the consumer to handle. An op amp ic of the General Purpose type. Linear amplifier is delivered in a Cut Tape (CT) case. During the past two weeks, there have been close to 5 terminations. It consists of a total of 5 pins in total. Please take in mind that op amp should be run at 5V. Instrumentation amplifier is a part of Operational Amplifier. A total of 5 pins are present on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. The mounting type that is recommended for this electrical part is Surface Mount. With regard to operating temperature, op amp ranges -40°C~85°C. Using an 1.03mA supply current, this operational amplifier ics can be operated. Keeping the voltage gain at 94dB is the best course of action. The op amp ic has 1 channels on it. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The linear amplifier is packaged by using a TR axis.
LMV721M7/NOPB Features
5 Pins
supply voltage of 5V
94dB voltage gain
Output Type: Rail-to-Rail
LMV721M7/NOPB Applications
There are a lot of Texas Instruments LMV721M7/NOPB Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Portable docking station
- RF cable systems
- Inverse/same-phase proportional circuit
- single/dual op amp sum and difference circuits
- High gain DC amplifier
- Industrial applications including automation
- Automation control systems
- Integrator circuits
- High input resistance broadband
