LMV722IDGKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -45°C~105°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LMV722 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Channels | 2 |
| Operating Supply Current | 2.01mA |
| Nominal Supply Current | 2.4mA |
| Output Current | 17.6mA |
| Slew Rate | 5.25V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 260nA |
| Voltage - Supply, Single/Dual (±) | 2.2V~5.5V |
| Output Current per Channel | 52.6mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 94dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 80μV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV722IDGKR Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case which makes it easy for the consumer to handle. The instrumentation amplifier in this picture is of the General Purpose-type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. There are a total of 8 pins on this op amp. Please take in mind that op amp should be run at 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The buffer op amp includes 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. Surface Mount is the recommended mounting type of operational amplifiers. The buffer amplifier functions well at -45°C~105°C as far as operating temperature is concerned. You can run this op amp ic on 2.01mA . The voltage gain should stay at 94dB. There are a total of 2 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 3V. This linear amplifier pack is based on the TR axis.
LMV722IDGKR Features
8 Pins
supply voltage of 5V
94dB voltage gain
Output Type: Rail-to-Rail
LMV722IDGKR Applications
There are a lot of Texas Instruments LMV722IDGKR Instrumentational OP Amps applications.
- Radar
- Fast A/D and D/A converters
- earphone
- Wireless base stations
- Semiconductor detectors
- Home audio systems
- Digital cameras
- Video conversion and routing
- Thermocouples
- single/dual op amp sum and difference circuits
