LMV722MM/NOPB

2 Channels 52.6mA per Channel 260nA 70 dB Instrumentational OP Amps 2.2V~5.5V ±1.1V~2.25V LMV722 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-LMV722MM/NOPB
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: -
Stock: 440
Description: 2 Channels 52.6mA per Channel 260nA 70 dB Instrumentational OP Amps 2.2V~5.5V ±1.1V~2.25V LMV722 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Cut Tape (CT)
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TR
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	LMV722
Pin Count	8
Output Type	Rail-to-Rail
Number of Channels	2
Operating Supply Current	2.01mA
Nominal Supply Current	2.01mA
Output Current	24mA
Slew Rate	5.25V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	70 dB
Current - Input Bias	260nA
Voltage - Supply, Single/Dual (±)	2.2V~5.5V ±1.1V~2.25V
Output Current per Channel	52.6mA
Input Offset Voltage (Vos)	3mV
Bandwidth	10MHz
Unity Gain BW-Nom	10000 kHz
Voltage Gain	94dB
Power Supply Rejection Ratio (PSRR)	70dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	5.5V
Voltage - Input Offset	80μV
Low-Bias	NO
Micropower	NO
Programmable Power	NO
Height	1.07mm
Length	3mm
Width	3mm
Thickness	970μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

LMV722MM/NOPB Overview

The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. A General Purpose-type buffer amplifier is shown here. A Cut Tape (CT) case is used to deliver the buffer op amp. The number of terminations approaches 8. The total number of pins on linear amplifier is 8. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 8 pins are available on the instrumentation amplifier. Op amp ic rates 3mV for input offset voltage. Surface Mount is the recommended mounting type for this linear amplifier. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . As long as the supply current of the chip does not exceed 2.01mA, this op amp ic can operate. It is a member of the 94dB's 94dB family. Buffer op amp is equipped with 2 channels on the device. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. TR is adopted to pack the instrumentation amplifier.