LMV7235M5
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LMV7235 |
| Pin Count | 5 |
| Output Type | Open-Drain, Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Nominal Supply Current | 95μA |
| Output Current | 55mA |
| Max Supply Current | 95μA |
| Propagation Delay | 62 ns |
| Quiescent Current | 95μA |
| Response Time | 68 ns |
| Common Mode Rejection Ratio | 67 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 6mV |
| Average Bias Current-Max (IIB) | 0.4μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 400nA |
| Input Bias Current | 400nA |
| Voltage - Input Offset (Max) | 6mV @ 5V |
| Current - Input Bias (Max) | 0.4μA @ 5V |
| CMRR, PSRR (Typ) | 67dB CMRR, 85dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
LMV7235M5 Overview
In order to make transportation easier, it is packaged in SC-74A, SOT-753 .The comparator has an output type of Open-Drain, Rail-to-Rail .As a result, it is designed with Tape & Reel (TR) package.The comparator has 5 terminals.The electrical component in this case belongs to the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 2.7V voltage.In general, the chip type can be classified as General Purpose .Electronic comparator consists of 1 elements in total.As a result, it contains 5 pins.The recommended mounting type is Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.There are 5 pins on the comparator.If you require more pin-to-pin solutions, search LMV7235 for more options.The comparator presents a quiescent current of 95μA volts.The PCB or other board can be mounted using the Surface Mount on it.Normal operation of the device requires a nominal supply current of 95μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 95μA .You are allowed to input a maximum current of 400nA into the device.Normal operation requires 5V operating supply voltage.Comparator electronics is acceptable to pack the device by TR .
LMV7235M5 Features
Open-Drain, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 95μA
LMV7235M5 Applications
There are a lot of Texas Instruments LMV7235M5 linear comparators applications.
- General Purpose Low Voltage Applications
- Point of load regulators
- Wearable Devices
- Mobile Phones
- Power Supervision
- Simple Analog-to-Digital Converters (ADCs)
- Body Control Modules
- Window Comparators, Multivibrators
- Mobile Phones and Tablets
- Building automation
