LMV7235M7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LMV7235 |
| Pin Count | 5 |
| Output Type | Open-Drain, Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Nominal Supply Current | 95μA |
| Output Current | 55mA |
| Max Supply Current | 95μA |
| Propagation Delay | 62 ns |
| Quiescent Current | 95μA |
| Response Time | 68 ns |
| Common Mode Rejection Ratio | 67 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 6mV |
| Average Bias Current-Max (IIB) | 0.4μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 400nA |
| Input Bias Current | 400nA |
| Voltage - Input Offset (Max) | 6mV @ 5V |
| Current - Input Bias (Max) | 0.4μA @ 5V |
| CMRR, PSRR (Typ) | 67dB CMRR, 85dB PSRR |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMV7235M7 Overview
To facilitate transportation, it comes packaged in 5-TSSOP, SC-70-5, SOT-353 .This comparator is of the Open-Drain, Rail-to-Rail output type.As a result, it is designed with Tape & Reel (TR) package.As you can see, the comparator has5 terminals.The component belongs to the Comparator family of electrical components.A comparator supplied with 2.7V voltage can complete many demanding tasks.A comparator of this type is typically of type General Purpose .This element consists of 1 elements in total.Electronic comparator has 5 pins.The type of mounting recommended is Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .Electronic comparator has 5 pins.Alternatively, you may search for LMV7235 to find more pin-to-pin solutions for your specific needs.There is a quiescent current of 95μA in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normally, the nominal supply current should be 95μA .If the current supply exceeds 95μA , the comparator could malfunction.Input current to the device cannot exceed 400nA .For normal operation, the operating supply voltage must be 5V .The device is packed in TR and is intended for general use (as an element in the ADC circuit).
LMV7235M7 Features
Open-Drain, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 95μA
LMV7235M7 Applications
There are a lot of Texas Instruments LMV7235M7 linear comparators applications.
- Zero-Crossing Detectors
- Window Comparators, Multivibrators
- Window Comparators
- Battery management and protection
- Infotainment & cluster
- Portable Battery Monitoring
- Ultra-Low Power Systems
- Hand-Held Electronics
- General Purpose Low Voltage Applications
- Body Control Modules
