LMV7239M7
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LMV7239 |
| Pin Count | 5 |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Number of Circuits | 1 |
| Nominal Supply Current | 95μA |
| Output Current | 55mA |
| Max Supply Current | 95μA |
| Propagation Delay | 62 ns |
| Quiescent Current | 95μA |
| Response Time | 68 ns |
| Common Mode Rejection Ratio | 67 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 6mV |
| Average Bias Current-Max (IIB) | 0.4μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 400nA |
| Input Bias Current | 400nA |
| Voltage - Input Offset (Max) | 6mV @ 5V |
| Current - Input Bias (Max) | 0.4μA @ 5V |
| CMRR, PSRR (Typ) | 67dB CMRR, 85dB PSRR |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMV7239M7 Overview
For convenience, it is packaged in 5-TSSOP, SC-70-5, SOT-353 .A comparator with an output type of Push-Pull is being used.This device is designed in Tape & Reel (TR) case.The comparator has 5 terminals.The component belongs to the Comparator family of electrical components.When supplied with 2.7V voltage, the comparator is capable of performing a wide range of tasks.It's a typical General Purpose comparator.A total of 5 pins are included.Electronic comparator is recommended that the mounting type be Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.5 pins are available on the comparator.You may wish to search LMV7239 for more solutions that address your specific needs.A quiescent current of 95μA is displayed by this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normal operation of the device requires a nominal supply current of 95μA .A current supply greater than 95μA may cause the comparator to malfunction.Electronic comparator is possible to input a maximum of 400nA current into the device.In order to operate normally, a supply voltage of 0 is required.The device is packaged in TR and is often used in ADC circuits.
LMV7239M7 Features
Push-Pull output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 95μA
LMV7239M7 Applications
There are a lot of Texas Instruments LMV7239M7 linear comparators applications.
- Battery-Powered Electronics
- Zero-Crossing Detectors
- Zero-Crossing Detectors
- Self-diagnostics
- Multivibrators and High-Voltage Digital Logic Gates
- Security Detection Systems
- Mobile Phones
- Appliances
- Factory automation & control
- Handheld Instruments
