LMV7239M7/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 28.009329mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LMV7239 |
| Pin Count | 5 |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 95mA |
| Nominal Supply Current | 95μA |
| Output Current | 55mA |
| Max Supply Current | 65μA |
| Propagation Delay | 62 ns |
| Quiescent Current | 52μA |
| Response Time | 68 ns |
| Common Mode Rejection Ratio | 67 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Supply Type | Single |
| Input Offset Voltage (Vos) | 6mV |
| Average Bias Current-Max (IIB) | 0.4μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 400nA |
| Input Bias Current | 400nA |
| Voltage - Input Offset (Max) | 6mV @ 5V |
| Current - Input Bias (Max) | 0.4μA @ 5V |
| CMRR, PSRR (Typ) | 67dB CMRR, 85dB PSRR |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV7239M7/NOPB Overview
To facilitate transportation, it comes packaged in 5-TSSOP, SC-70-5, SOT-353 .There is a Push-Pull output type for this comparator.We ship the part through Tape & Reel (TR) .5 terminals are found on the comparator.Electronic comparator is a part of Comparator family.When supplied with 2.7V voltage, the comparator is capable of performing a wide range of tasks.A comparator of this type is typically of type General Purpose .This is a 1 element comparator.Electronic comparator includes 5 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.There are 5 pins on the comparator.Alternatively, you may search for LMV7239 to find more pin-to-pin solutions for your specific needs.A quiescent current of 52μA is observed in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.For normal use of the device, the nominal supply current should be 95μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 65μA .Input current to the device cannot exceed 400nA .Normal operation requires 5V operating supply voltage.This device can be used in general (for example, in ADC circuits). It is packaged in TR .
LMV7239M7/NOPB Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 52μA
LMV7239M7/NOPB Applications
There are a lot of Texas Instruments LMV7239M7/NOPB linear comparators applications.
- Handheld Instruments
- Infotainment and Clusters
- General-Purpose Portable Devices
- System control and monitoring
- Battery-Powered Electronics
- RC Timers
- High-Speed Differential Line Receiver
- Zero-Crossing Detectors
- Body Control Modules
- Point of load regulators
