Parameters |
Lifecycle Status |
NRND (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
5-TSSOP, SC-70-5, SOT-353 |
Number of Pins |
5 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e0 |
Part Status |
Not For New Designs |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
Comparator |
Packing Method |
TR |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.7V |
Base Part Number |
LMV7239 |
Pin Count |
5 |
Output Type |
Push-Pull |
Number of Elements |
1 |
Nominal Supply Current |
95μA |
Output Current |
55mA |
Max Supply Current |
95μA |
Propagation Delay |
62 ns |
Quiescent Current |
95μA |
Response Time |
68 ns |
Common Mode Rejection Ratio |
67 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~5.5V |
Input Offset Voltage (Vos) |
6mV |
Average Bias Current-Max (IIB) |
0.4μA |
Power Supply Rejection Ratio (PSRR) |
85dB |
Supply Voltage Limit-Max |
6V |
Input Bias Current |
400nA |
Voltage - Input Offset (Max) |
6mV @ 5V |
Current - Input Bias (Max) |
0.4μA @ 5V |
CMRR, PSRR (Typ) |
67dB CMRR, 85dB PSRR |
Height |
1.1mm |
Length |
2mm |
Width |
1.25mm |
Thickness |
900μm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
LMV7239M7X Overview
To facilitate transportation, it comes packaged in 5-TSSOP, SC-70-5, SOT-353 .A comparator with an output type of Push-Pull is being used.Electronic comparator is shipped by Tape & Reel (TR) .The comparator has 5 terminals.Electronic comparator is a component of the Comparator family.Supplied by 2.7V voltage, the comparator can accomplish the many demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .Electronic comparator consists of 1 elements in total.The device is equipped with 5 pins.Electronic comparator is recommended that the mounting type be Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.The comparator is equipped with 5 pins.Try search LMV7239 to get more pin-to-pin solutions for your special needs.There is 95μA current flowing in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current of the device be 95μA .A current supply greater than 95μA may result in the comparator malfunctioning.This device is usually used in ADC circuits (packaged in TR ).
LMV7239M7X Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 95μA
LMV7239M7X Applications
There are a lot of Texas Instruments LMV7239M7X linear comparators applications.
- Window Comparators
- Metering Systems
- Mobile Phones and Tablets
- Battery-Powered Electronics
- System control and monitoring
- Body Control Modules
- Limit Comparators
- General-Purpose Portable Devices
- Consumer Medical Electronics
- Security Detection Systems