LMV7271MF/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | LMV7271 |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Nominal Supply Current | 14μA |
| Output Current | 34mA |
| Max Supply Current | 14μA |
| Propagation Delay | 2.1 μs |
| Quiescent Current | 14μA |
| Response Time | 1800 ns |
| Common Mode Rejection Ratio | 78 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Input Offset Voltage (Vos) | 4mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 10nA |
| Input Bias Current | 10nA |
| Voltage - Input Offset (Max) | 4mV @ 5V |
| Current - Input Bias (Max) | 0.01μA @ 5V |
| CMRR, PSRR (Typ) | 78dB CMRR, 80dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV7271MF/NOPB Overview
A convenient packaging is provided in the form of SC-74A, SOT-753 .The comparator has a CMOS, Push-Pull, Rail-to-Rail output.The part will be shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 5 terminals of the comparator.The chip belongs to Comparator .A comparator is capable of completing a variety of demanding tasks when supplied with 1.8V voltage.In general, the chip type can be classified as General Purpose .This element consists of 1 elements in total.There are 5 pins on this board.In general, mounting type Surface Mount is recommended.The operating temperature should be set to -40°C~85°C to avoid mal-function.The comparator consists of 5 pins.If you require more pin-to-pin solutions, search LMV7271 for more options.The comparator presents a quiescent current of 14μA volts.The board has a Surface Mount for mounting on a PCB or any other board.Normal operation of the device requires a nominal supply current of 14μA .A current supply greater than 14μA may result in the comparator malfunctioning.Electronic comparator is possible to input up to 10nA current into the device.The operating supply voltage for normal operation should be 5V .With a TR package, this device is designed for general use (usually in ADC circuits).
LMV7271MF/NOPB Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 14μA
LMV7271MF/NOPB Applications
There are a lot of Texas Instruments LMV7271MF/NOPB linear comparators applications.
- General Purpose Low Voltage Applications
- Threshold Detectors
- Appliances
- Window Comparators
- Zero-Crossing Detectors
- Mobile Communications
- Battery-Powered Electronics
- Window Comparators, Multivibrators
- Mobile Phones and Tablets
- Point of load regulators
